for vehicles with 2,0 TDI / 2,0 TSI and 4motion FA-load: up to 1200 kg, RA-load: up to 1210 kg Lowering FA ca. 25 mm, RA ca. 30 mm
range of use:
VW Arteon_3G80 (coupe, MY 2018)
all versions with 2,0l TDI/ 2,0l TSI and AWD
below the following max. axle loads: FA: 1200kg RA: 1210kg
- vehicles with electronical damper control DCC
not suitable for:
- all versions with R-Line sport suspension
The final lowering rate varies depending on the configuration of the vehicle. In the time after the springs have been mounted it is possible that the front axle lowering increases. At Vehicles with electronical damper control the lowering will be 10-15 mm less.
After mounting the ABT - suspension springs the position of the head lamps and axle needs to be checked and possibly re-adjusted (work incl. in the assembly costs). Addtionally and depending on the serial car configuration further technical systems (for example: lane assist; adaptive cruise control; cornering lights, camera systems, etc.) needs to be checked and possibly re-adjusted. In this regards it is necessary to follow the current instructions of the manufacturer.
The costs for possibly additional work is not included in the assembly time and therefore needs to be charged additionally.