FA-load: up to 1200 kg, RA-load: up to 1265 kg
Lowering FA 15-40mm, RA 15-40mm
Mounting of the suspension springs will be performed in connection with the serial suspension units and damper.
Audi A4 Avant (8W00) quattro without electronical damper control
Audi A5 Sportback (8W60) quattro without electronical damper control
Audi A5 Cabrio (8W60) quattro without electronical damper control
Suitable for vehicles
- with Audi sport suspension and with electronical damper control
- with Audi comfort suspension and with electronical damper control
- since 11.07.2016 the vehicles without electronical damper control will be also fitted with a different strut, which has a diffenert diameter (48,5 mm instead of 50mm). The struts can only be differentiated by measuring the struts undernetah the spring. If the diameter shows 48,5 mm the ABT height adjsutable springs can only be fitted in connection with a threaded sleeve set Art.No.: 8W00 5002 116.
This set is not included in the ABT height adjustable suspension springs and have to be ordered separately.
After mounting the ABT - suspension springs the position of the head lamps and axle needs to be checked and possibly re-agjusted (work incl. in the assembly costs).
The final lowering depends on the individual configuration of the vehicle; the lowering might be 20-25mm less for vehicles with Audi serial sport suspension.
Addtionally and depending on the serial car configuration further technical systems (for example: Audi lane assist; adaptive cruise control; rear assist; parking system plus, etc.) needs to be checked and possibly re-adjusted
In this regards it is necessary to follow the current instructions of the manufacturer. The cost for possibly additional work is not included in the assembly time and therefore needs to be charged additionally.